What is the common maintenance method of Gasoline Log Splitter? Any problems will appear during use. Users can find solutions to some small problems by themselves, but some problems require our professionals to answer questions. The key is the maintenance method of Gasoline Log Splitter equipment, several common maintenance methods of Gasoline Log Splitter manufacturer, you can:
1. You must check the Gasoline Log Splitter before purchasing. Choosing a good manufacturer is very important. Not only quality assurance, but also all aspects of after-sales service are very reliable. Don't buy cheap equipment, so you can buy inferior equipment. The loss is still yours.
2. The Gasoline Log Splitter should be regularly lubricated and dry oil lubricated. Add special grade of special grease, the quantity is 1/2-2/3 of the bearing cavity, and add an appropriate amount of grease every six months. .
3. The startup sequence of the whole set of equipment is: screening machine→host→feeding. The tree shredder must be started under no load and can be fed after the mill is running normally. The shutdown sequence is opposite to the startup sequence.
4. Arrange a professionally trained operator to perform the correct operation, so as not to damage the branch shredder. Communicate with us in time, raise questions as soon as possible, and we will solve any problems in the operation of the branch shredder.
When replacing the branch mill with a new branch mill, please make sure that the blade has the same length and the same quality. Avoid using blades that are too long or too light or too heavy to avoid imbalance of the rotor in the machine. Noise and vibration are generated during the production process. After replacing the blade, be sure to check the screws on the upper blade to ensure that the screws are tightened to avoid loosening the screws during production in the future.
Therefore, in your daily work, you must be proficient in the operation of Lumberjack Log Splitter. Many users do not pay much attention to details. This directly leads to failure. Before starting the machine, you need to perform a thorough inspection of the equipment to ensure that all parts of the equipment are intact.