The Chipper Shredder blade will become dull after a long time of use, so at this time, it will be repaired and polished to better use the blade. Today we will take a look at how to repair the blade.
As an important part of Chipper Shredder, considering that the shredder blade often crushes dozens of waste products during use, the complexity of crushing is very high and it is easy to cause wear of the blade of the shredder. Once the cutter of the shredder becomes blunt, the shredding effect will become very poor. Replace the spare tool and take out the dull tool for grinding.
The grinding of the shredder blade is different from other tools. Other types of mechanical blades basically use grinders to grind flat surfaces or cut edges. However, the structure of the shredder blades and the design of the multi-claw blades make it impossible for the grinder to grind them, and a single grinding of the blade plane will cause the gap between the blades to be too large, and seriously affect their use. The grinding of shredder blades is different from other tools. Other types of mechanical blades basically use grinders to grind flat surfaces or cut edges. However, the structure of the shredder blades and the design of the multi-claw blades make it impossible for the grinder to grind them, and a single grinding of the blade plane will cause the gap between the blades to be too large, and seriously affect their use.
Chipper Shredder blade wear is mainly the wear on the claws. A very simple method is to polish the inside of the blade with a polishing machine until the blade is sharp. It should be noted that the arc planing of the knife claw should be strictly responsible, and it should be perpendicular to the plane of the shredder blade to minimize the loss of the original knife body.
Working environment requirements: Because the shredder crushes the scrap iron pieces into small particles, and there is a dust problem on the scrap iron pieces, dust will be generated during the working process. For the health of operators and environmental protection, a dust removal system is designed to clean the working environment.
The above content is about Petrol Log Splitter. We must pay more attention to the use environment of the paper shredder, clean and tidy, in order to better use.