1. What should I do if the tires of Vegetable Planter field work are punctured?
If the air leak is not serious at that time, slowly drive the micro tiller out of the field, and then pull out the puncture to repair it.
2. What should I do with the slow brake air of the tiller tires?
You can pull out the valve core to release the inner tube air, take a piece of cardboard and make it into a funnel shape, insert the small head into the valve mouth, and pour a small amount of talcum powder into the inner tube depending on the size of the tire. When it can't fill in, you can remove the funnel, turn the tire and continue filling until the talcum powder is filled. Then install the valve core and fully inflate. When inflated, the talcum powder will disperse in the tire, and the pores of the slow brake air will be blocked.
3. What should I do if the plastic cover of the valve on the tire of the tiller is lost?
You can cut a piece of soft plastic tube, bake it with fire, pinch one end, and put the other end on the valve.
4. What should I do if the oil tank of Planting Machine leaks?
If you find oil leaking in the fuel tank, wipe the leaking area clean and apply soap or bubble gum to the leaking area to reduce leakage. If there is an adhesive such as epoxy resin to temporarily stop the leak, the effect will be better. Sometimes it is due to small cracks. You can put the parts in kerosene, take it out after a period of time, dry the surface and sprinkle a layer of white powder, and then use a small hammer to knock the parts quietly. If there are cracks, the vibration will be caused by the hammer. The kerosene that has been immersed in the crack is exuded from the crack, and the crack appears on the white powder.