Petrol Log Splitter is an important equipment in wood processing machinery, also known as wood chip machine, wood chipper, wood chip machine, etc. The chipper is composed of a base, a cutter head, a drive shaft, a feed port, a cover, an electric control system, etc. It can be said to be simple but not simple, with a stable structure, strong and durable. The following cnsuperpower will explain to you the factors affecting Petrol Log Splitter:
1. The general process of wood chip processing factory. After transporting the eucalyptus trees from the mountain to the factory building, from the wood peeling machine to the wood processing, the raw wood is put into the trough peeling machine with large mechanical equipment. The peeling machine uses the unique force generated by the rotor to circulate in the trough plate of the silo, and make the rotation movement around the axis of the wood section itself, and irregular beating. At this time, the friction, impact and squeeze between the wood section and the tooth, wood section and wood section, wood section and the bin groove continue, and the bark is quickly separated.
2. The separated wooden roller enters the feeding device from the conveyor belt and is fed into the wood machine. The feeding device sends the wood into the disc chipper, and then the wood is fed into the wood from the feeding port. When the wood is in contact with the cutting blade, with the high-speed rotation of the cutting tool head, the cut wood chips are sent into the area where the wood chips are stacked by the high-speed steam flow generated by the air blade on the cutting tool head.
3. Wood humidity: Generally, it is recommended to dry the wood for a few days after cutting, and then peel it. In addition, the season will also affect the peeling rate. Under normal circumstances, the stripping rate is 95% in summer and 80% in winter.
4. Wood bending: Because the Performance Built Log Splitter uses the unique force generated by the rotor with peeling teeth, the wood part of the material CaO repeats the movement to make the wood section and teeth, wood section, wood section, wood section and groove A high peeling effect is achieved between constant friction, impact, squeezing, and rapid bark separation, so that the bending of the wood should not be too large. In order to prevent the wood from being inseparable, because it cannot contact the teeth, the curvature is generally allowed to be 8%.
