Caps Lock On

Instructions For Use Of Performance Built Log Splitter

Lid sinds 14 apr 2020
Startgewicht: 50 Kg
Streefgewicht: 45 Kg

The emergence and development of Performance Built Log Splitter meets the needs of industrial production, while complying with environmental policies and the concept of waste recycling. Therefore, it can be said that Performance Built Log Splitter is an emerging energy-saving and environmentally friendly device in recent years. The level of green waste is effectively solved, which has made a great contribution to the development of my country's forestry industry and made greater use of resources. Instructions for use and maintenance of Performance Built Log Splitter:

  1 Before starting to test the branch shredder, it is necessary to strictly check whether the installation of each part of the machine meets the requirements. If the screw is loose, you can gently pull the belt to test its rotation and whether it has shelled. Also, check the direction of rotation. It is strictly prohibited to squeeze flammable and explosive materials to avoid accidents.

  2 In order to ensure the crushing quality and normal production, the production of the branch plant should be maintained, and the motor overload should be strictly prohibited to ensure the normal operation of the machine.

  3 In addition to frequent inspections to ensure that the parts are loose, branch factories should also pay attention to the wear of consumables. If the wear is severe, it should be replaced in time to avoid damage to the main components. And take necessary fire prevention measures.

  4 Due to speed, the rolling mill should be fully lubricated to keep the machine running. Generally, it is normal that the bearing temperature does not exceed 70 degrees. Add butter and molybdenum disulfide to the main bearing once a week.

  The harder the material crushed by the branch mill, the more difficult it is to crush the Performance Built Log Splitter, and the more serious the equipment will wear. After a long period of time, it is easy to cause damage, which severely reduces the operating speed and reduces the crushing capacity of the wood chipper. When the moisture contained in the material is large, the material tends to adhere to the inside of the wood shredder and is easily clogged during feeding, which increases production resistance and reduces the pulverizing ability of the branch shredder. If conditions permit, the humidity of the material can be reduced. The Performance Built Log Splitter and power unit should be installed safely.

If the branch mill is fixed for a long time, it should be fixed on a cement foundation; if the Petrol Log Splitter is movable, the equipment should be installed on a base made of angle iron, and ensure the power machine (gasoline, diesel or electric motor) And the branch was crushed. The grooves of the pulley are located on the same plane of rotation. Before starting the rolling mill, please turn the rotor by hand to check whether the teeth, hammer and rotor are running flexibly and reliably. There is no collision at work. The direction of rotation of the rotor is consistent with the direction indicated by the arrow. Are the power machine and grinder lubricated?