After long-term use of Gasoline Log Splitter, there will be symptoms of wear and tear. With this phenomenon, more equipment will be damaged. If it is not for solving and handling, once the wear level reaches a certain level, this will directly cause the equipment Failure, thereby affecting the progress of use. The following is mainly for the problem of this product series. First of all, we must understand what the forms of wear are. Here is how we will follow the Shandong Gasoline Log Splitter manufacturer to get a simple understanding of the students!
2. Surface wear of equipment: Surface wear is a common situation in Gasoline Log Splitter. At the same time, the alternating contact stress of the enterprise can cause a primary microcrack on the surface, and continuous innovation and development need to cause the phenomenon of particle shedding of related materials. For example, the rolling surface of the rolling bearing of the equipment, close to the index circle of the gear tooth surface, the contact surface of the rail and the wheel, etc., often have small pits or pits, which are caused by typical surface fatigue and wear.
3. Corrosion and wear: When the surface of the corrosive environment is generated, the reaction product on the surface of the wood dryer has a weak surface bond, and the friction reaction product of constant wear is usually exposed and quickly generates new reactions. cycle. It will have a serious impact on the equipment.
There is a panic of wear and tear on the wooden machine, this can help you!
4. The problem of parts wear is serious: the force can cause fatigue damage to students. The plastic deformation and heating of the equipment surface will be affected by the liquid lubricating medium. The latter is mainly caused by fatigue damage caused by alternating stress.
5. Once the user information is checked that Lumberjack Log Splitter has abrasion, it should be able to start analysis and processing immediately. If we delay the solution, the friction of the equipment will gradually increase, and further research on the degree of wear will deepen. Until a bigger problem arises. This is also to avoid unstable operation of the equipment.
