Mechanical equipment accessories are a very important part. The high efficiency of the equipment is related to the accessories. Therefore, they must be maintained at ordinary times. Some details cannot be ignored, so as to avoid the occurrence of failures. Take Rapid Splitter as an example. example. The Rapid Splitter is driven by belts, so we must do a good job of its maintenance daily to ensure the normal operation of the Rapid Splitter. Here is how to maintain the Rapid Splitter belt:
1. The belt of the Rapid Splitter cannot be too tight or too loose when it is running, so the belt should be adjusted at any time.
2. The belt should prevent direct contact with acid, alkali, diesel, engine oil, gasoline, etc., and avoid direct exposure to sunlight.
3. V-belts produced by different factories or with different levels of new and old cannot be used in the same group, and belts of different specifications and models cannot be substituted for each other.
4. The V-belt of the counter-roller should not be operated at a temperature higher than 60℃.
5. The pulley hole of the pulley has cracks, the groove gap or the groove surface should be replaced in time. The belt has been severely worn and the belt is in contact with the groove bottom, the belt is aging, cracks or plastic distortion. It should be replaced accordingly, and the belts on the same pulley should be replaced at the same time.
6. In order to prevent the Rapid Splitter belt from slipping, belt wax or belt oil should be applied to the working surface of the belt, but it is generally not used. If the belt slips, the belt tension can be increased.
7. Keep the belt and pulley clean and tidy to prevent the intrusion of dust.
The above are the precautions for maintaining the Chipper Shredder belt. You must keep in mind that only by maintaining the equipment can it bring you more benefits.
