Caps Lock On

Basic Fixation Of Full Threaded Stud

Lid sinds 13 apr 2020
Startgewicht: 50 Kg
Streefgewicht: 45 Kg

 In mechanical design, a problem often encountered is how to tighten a small nut. For example, Japanese eccentric nuts, Down nuts and Chinese self-tightening king nuts are well understood by everyone. But we are not going to talk about the stars of these Full Threaded Stud circles today, let's talk about the most basic method of fixing nuts at work.

The washer refers to the part that is cushioned between the connected piece and the nut. Generally, a flat metal ring is used to protect the surface of the connected part from being scratched by the nut and disperse the pressure of the nut on the connected part.


Flat washers and spring washers


Spring washers are widely used in load-bearing and non-load-bearing structures of general mechanical products. They are characterized by low cost, convenient installation, and are suitable for parts with frequent assembly and disassembly. But the anti-loose ability of the spring washer is very low!

Self-locking nuts

Normal nuts will loosen due to vibration and other reasons during use, such as vibration. To prevent this phenomenon, self-locking nuts were invented. The main function of the self-locking nut is to prevent loosening and vibration. For special occasions. Its working principle is generally self-locking by friction. The types of self-locking nuts classified according to their functions include nylon-embedded, neck-closed, and metal anti-loosening devices. They are all effective torque type locknuts.

Due to its nature, self-locking nuts are difficult to screw.

Nut lock fluid

Apply the nut anti-loosing fluid to the tightening part of the bolt, and then screw on the nut to achieve the anti-loosening effect.

Double nut (left and right rotation) anti-loosening

It is also a good method to tighten and prevent loosening by matching a left-hand nut and a right-hand nut.

Screw and nut drilling and pin fixing

 In machinery, China Fasteners is mainly used for assembly positioning, and can also be used as an overload shear connection in connection and relaxation level safety devices. The types of pins are: cylindrical pin, tapered pin, pin with hole, split pin and safety pin.